What Are Lead Weight Molds?
Lead weight molds are a popular tool among anglers and fishermen. They are used to create perfect weights that can be used while fishing in a variety of conditions. Lead weight molds are also called “sinkers” since they are used to add weight to a fishing line or lure to make it sink down in the water. Lead weight molds come in a variety of shapes and sizes, and can be used to create weights that range from a few ounces to a few pounds.
Lead weight molds are typically made from either lead or brass. Lead molds are usually preferred, as they are less expensive and easier to work with than brass molds. Lead molds can be heated up to high temperatures, allowing them to be shaped into any desired shape.
How to Use Lead Weight Molds
Using a lead weight mold is relatively simple. First, you need to decide what type of weight you want to create. You can choose from a variety of shapes and sizes, depending on the type of fishing you are doing. Once you have decided on the weight and shape, you need to select the appropriate lead weight mold.
Once you have the lead weight mold, you will need to heat up the mold using a propane torch or a heat gun. The mold should be heated until it is red hot, which will make it pliable and easy to shape. Once the mold is hot enough, you can then shape it into the desired shape and size. Once the weight is shaped, it can then be cooled off and removed from the mold.
Benefits of Lead Weight Molds
Lead weight molds offer several benefits to anglers and fishermen. The most obvious benefit is the ability to create perfect weights for any type of fishing situation. Lead weights can be shaped and molded into any desired shape and size, which is useful for anglers who need to adjust their weights for different conditions or types of fish. Lead weight molds also last a long time, as they are made from durable materials that can withstand the elements.
In addition to creating perfect weights, lead weight molds also allow anglers to save money. Lead is much cheaper than brass, so anglers can save money by using lead weight molds instead of brass molds. Lead molds are also easier to shape and work with, so anglers can save time and energy by using lead molds.
Different Types of Lead Weight Molds
Lead weight molds come in a variety of shapes and sizes, so anglers can find one that is perfect for their needs. Some of the most common types of lead weight molds include:
- Tube Molds: Tube molds are used to create cylindrical weights, which can be used to add weight to a fishing line or lure. These molds come in a variety of sizes, so anglers can choose the size that best fits their needs.
- Bullet Molds: Bullet molds are used to create weights that are shaped like bullets. These molds come in a variety of sizes, so anglers can create weights that range from a few ounces to a few pounds.
- Spiral Molds: Spiral molds are used to create weights with a spiral shape. These molds are typically used to add weight to lures or lines in order to make them sink down in the water.
Tips for Using Lead Weight Molds
When using lead weight molds, there are a few tips that anglers should keep in mind. First, it is important to make sure that the mold is heated up to the right temperature before attempting to shape it. If the mold is not hot enough, it can be difficult to shape and may not create the desired weight. It is also important to make sure that the mold is not too hot, as this can cause the lead to melt and become unusable.
In addition, it is important to make sure that the weight is cooled off properly after it is removed from the mold. If the weight is not cooled off properly, it can be difficult to remove it from the mold and can cause damage to the weight. Finally, it is important to make sure that the weight is properly stored after it is removed from the mold. Lead weights should be stored in a cool and dry place.
Conclusion
Lead weight molds are a popular tool among anglers and fishermen. They are used to create perfect weights that can be used while fishing in a variety of conditions. Lead weight molds come in a variety of shapes and sizes, and can be used to create weights that range from a few ounces to a few pounds. When using lead weight molds, it is important to make sure that the mold is heated up to the right temperature and that the weight is cooled off properly after it is removed from the mold. Lead weights should also be stored in a cool and dry place.